Atomised coating lands in passes thin enough to see through, so what dries is level, without brush ridges, roller texture or a thick edge waiting to chip. That is the single biggest difference from ordinary interior work.
Cabinet painting therefore happens in two places at once. The fronts leave for a filtered booth, dust and temperature and humidity all held steady. Carcasses and face frames have nowhere to go, so they take their coats indoors behind sealed plastic, extraction running, adjoining rooms masked.
A Brush Leaves A Record Of Itself On A Cabinet Door
Brushed cabinet painting leaves ridges even under a good painter, and a raised panel profile shows them badly. Under a row of pot lights or a window facing Little Lake, those ridges catch the light across the whole run.
Sprayed cabinet painting is also thinner, and thin is what lasts. Three thin coats with a scuff between them bond better and chip less than one heavy coat, because a thick brittle film cracks where a thin flexible one moves.
This is the whole reason fronts leave a property. A booth cancels the two things that ruin a finish: dust settling into wet coating, and a room too cold or too damp for the product to flow out.
Two Coating Families Cover Nearly Every Cabinet Painting Job
Waterborne alkyd enamels are the common cabinet painting choice. They flow out well, tint to thousands of shades on any deck, sit comfortably beneath fifty grams of VOC per litre, and ask for about sixteen hours between passes, a week before ordinary use, thirty days for full hardness.
Two-component polyurethanes are the tougher option. Hardener goes in immediately before spraying, the mixed material lives only a few hours, it sands at two and cures at twenty-four, and the cured film beats anything single-component for chemical and wear resistance. Against that, whatever is mixed and unused is wasted, and the gun is the only way to apply it.
Colour, sheen and how soon the room is wanted back decide between them. Each is low-VOC, and the quote names which one rather than leaving it vague. Sheen runs from matte through satin to semi-gloss, and satin carries most kitchens.
Real Containment Is What Keeps Dust Out Of The Other Rooms
Cabinet painting indoors works only where the containment is genuine. Plastic runs floor to ceiling across every opening, the floor is covered and taped down, counters and appliances are wrapped, and a fan draws air outside instead of pushing it along the hall.
Households where somebody is in all day feel this more than anybody. With a median age in the mid-forties, this city has plenty of kitchens whose owner never leaves during the job, so smell, dust and how many days the room stands idle count for as much as the finished shade.
Fixed cabinetry elsewhere in the house takes the same cabinet painting method, which is covered under the built-in cabinetry page.
Sprayed Cabinet Painting Costs More And Lasts Much Longer
Sprayed cabinet painting is dearer than brush and roller work, because a booth, masking, containment and extra hours all go into it. Around here that premium runs to several hundred dollars in a small kitchen, and more again in a big one.
What it buys is years. Sprayed and properly cured, a cabinet painting job outlasts a brushed one on identical fronts, and the gap opens first around the pulls and inside the cutlery drawer, where the wear gathers. Paying twice inside five years costs more than paying once.
Book The Spraying And Get The Products Named In Writing
Every cabinet painting quote carries the primer, the family of topcoat, the sheen and a pass count, so any promise can be checked against finished fronts. Call +1 (705) 230-9056, ask for the visit, or go back to everything else on offer.
Cabinet Spray Painting Questions
Is spraying better than brushing?
Spraying lays thin coats that flow out level, with no ridges, roller texture or thick edges waiting to chip. A brush leaves a record of itself on every door. That is the biggest difference from ordinary interior painting.
Which coatings do you spray?
Two families cover nearly every job. Waterborne alkyd enamel flows out well and takes thousands of tints. Two-component polyurethane is mixed with a hardener and cures harder and faster. Both are low-VOC, and the quote names the one going onto your fronts.
How is dust kept out of the rest of the house?
Doors are sprayed away from the property in a filtered booth. Boxes and face frames are coated in place behind sealed plastic with the extraction running, and the rooms next door are masked. Real containment is what keeps dust where it belongs.